‧ eteeController, Left and Right

‧ 2 eteeTracker SteamVR

‧ 1 eteeDongle

‧ 2 USB charging cables

‧ 3 foam sizes, 2x S/M/L

Note: There are 2 types of dongle.

eteeDongle (with transparent lens) is for eteeController.

eteeDongle SteamVR (with gold tip) is for eteeTracker SteamVR and other SteamVR devices.

1. Thumbpad

2. eteeTracker power button

3. Tap zone

4. Full finger tracking

5. eteeTracker LED

6. LED slider
(configurable as analog input or two independent buttons)

7. Replaceable foam (S, M & L)

8. eteeController power button

9. USB-C charging port

Note: You should hear a distinct click when the tracker is connected properly.

Note: You should hear a distinct click when the tracker is connected properly.

Power-ON: Press and hold the power-button for 2s.

Power-OFF: Press and hold the power-button for 5s.

Blink blue: Device is not connected.

Breathing pink: Device is connected and active.

Breathing red: Device is low on battery.

Blink red: Device is critically low on battery.

Breathing yellow: Device is active and charging.

Solid yellow: Device is powered-off and charging.

No LED: If a charging cable is not connected, device
is powered-off. If a charging cable is connected,
device is fully charged.

Note: Tracker will charge together with eteeController when they are plugged in for charging. Make sure to securely attach the tracker to the controller for this feature to work properly.

Install Steam via https://store.steampowered.com/about/

Install SteamVR via https://store.steampowered.com/app/250820/SteamVR/

Go to the eteeConnect page.
Please visit the link below. https://store.steampowered.com/app/1590110/eteeConnect/

Download eteeConnect to install eteeController drivers, visualise device data, configure the device, and keep them updated.

!! Note: eteeConnect and SteamVR cannot be run simultaneously. Please run only one application at a time.

Insert eteeDongle to PC and open SteamVR.
.......... .......... .......... .......... .......... .......... .......... ..........

Turn on devices. Press and hold the power-button on eteeController and eteeTracker SteamVR for ~2s.

!! Note: eteeConnect and SteamVR cannot be run simultaneously. Please run only one application at a time.

Right click on SteamVR status windows bar.

Select  “Devices “ & click “Pair Controller”.

Select any of the 4 options.
............... ............... ............... ............... ............... ................. ................ ............... ............... .............. .............. ..............

Put eteeTracker SteamVR into pairing mode. Press and hold the power-button for 3s. LED will blink blue for pairing then solid green when paired.

After pairing, right-click on SteamVR status and select Devices > Manage trackers.
.............................. ................................ .............................. ............................. ...............................

The "Manage Trackers" menu displays all trackers connected to the PC. Trackers with a green icon are currently active. This should be noted when assigning handedness to the tracker.

In the drop-down list for Tracker Role, select Disabled for the active tracker.

......................... ........................... ......................... ........................ .......................... 

Repeat step 6 to step 9 for the other tracker. Swap the hands in drop-down menu if needed.

Note: SteamVR restart will be required for the swapping to take effect.

Note: Make sure the firmware of eteeControler and eteeDongle are updated to the latest version through eteeConnect before using.

Run the eteeConnect application. 

Correct hand position during calibration.

Go to > Option > Calibration. Follow the on-screen guide for eteeConnect calibration.

Note: You can do the quick calibration by double clicking the power-button of eteeController.

eteeConnect calibration: This procedure adjusts the sensing range to match your hand and is required only once.

Quick calibration: This procedure simply updates the initial reference for finger tracking and should be performed regularly.